Conical High voltage 10M Steel Tubular Pole for 110kv power distribution transmission line
Application:
Transmission Applications
Light Duty Steel Poles
Custom Design Transmission Poles
Steel H-Frame Poles
Substation Applications
Dead End Structures
A-Frames and H-Frames
Special Application Structures
Low Side Supports – Buss, Switch, and Other equipment
Static and Shield Wire Poles
Technical Data Sheet
| series | Outside Diametar | Wall Thicness |
| mm | Min. | mm /SWG |
| 15 L | 21.3 | 2 |
| M | 2.6 |
| H | 3.2 |
| 20 L | 26.9 | 2.3 |
| M | 2.6 |
| H | 3.2 |
| 25 L | 33.7 | 2.6 |
| M | 3.2 |
| H | 4 |
| 32 L | 42.4 | 2.6 |
| M | 3.2 |
| H | 4 |
| 40 L | 48.3 | 2.9 |
| M | 3.2 |
| H | 4 |
| 50 L | 60.3 | 2.9 |
| M | 3.6 |
| H | 4.5 |
| 65 L | 76.1 | 3.2 |
| M | 3.6 |
| H | 4.5 |
Pole Design
Standard Accessory
-Top plate
-Base plate
-Bottom strip
-Standard hole
-Climbing rung
-Anchor bolt
-Bitumen protection
-Painted marking
-Removable ladder
Available Foundation Types
Direct Embedment
Anchor Bolt/Base Plate
Vibratory Steel Caisson
Here are some reasons why they made the switch from the wooden pole to Steel Utility Pole:
Fabricated with uniform dimensions
Easy to install
Durable
Easy to maintain
Lower in life cycle costs
A solution to EPA regulations and deforestation issues
Superior in strength
Impervious to insects and rot
Free of toxic chemical treatments or hazardous waste concerns
100% recyclable
Tapered Tubular Substation Structures
Steel Substation Structures
Custom Substation Designs
Closed Section Tubes
I-Beam Structures
Lattice Structures
Steel Structures with Higher Translational Stiffness
More Pictures
Company Manufacture Ability
• 2500t Brake Press (capacity to press poles with wall thicknesses up to 30mm)
• Automatic Plasma cutting, Flame cutting, Seam welding and Flange welding machines
• Straightening machines
• CNC Punching machines
• Capacity to produce poles with diameters ranging from 60mm to greater than 3000mm
• Capacity to produce poles in heights from 3m to greater than 75m
• Capable of producing poles for any requirement from small distribution poles to large transmission poles
Workshop
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.
Product Tags:
|
|
Conical 10M Steel Tubular Pole For 110kv Power Distribution Transmission Line Images
|
